Not 100% on that. I believe they changed the valve cover breather to intake tube hookup. It now runs through a solenoid ('18-'19 change I believe) and the intake tube hookup is not just an elbow/breather tube that's pushed in. Its impossible to get it apart/out. The CIA will physically fit but your going to have to run your valve cover or solenoid to open air (meaning cut off the tubes from solenoid to valve cover and put on breather) instead of back to the intake in front of throttle body. So this means you'll have the CAI with a breather on the motor but still have all the solenoid junk hanging around doing nothing instead of running pressure/vapors from the engine back into the intake stream. It
can be done but it's just not a pop in deal and the extra evap/emissions stuff is just something extra in the mix.
@Hunter had problems with this awhile back. Maybe he can chime in.