- Member ID
- #1332
- Messages
- 969
- Reactions
- 853
- Likes
- 132
- City
- Oro Valley
- State
- AZ
- Country
- United States
- Vehicle
- 16 HC Challenger
I do have one on me. I think they call them keys as they fit inside a socket opening.
I want to order another one just in case.
It has 7 splines on it.
The end that fits to the socket will fit either with a 20 or 22-mm socket depending on if you want it to be torqued with the smaller first fitting or the larger second fitting.
I am unsure as to where you take the measurement on the spline side.
If I measure from outside to outside, it is around 11/16ths.
Can someone point me in the right direction?
I want to order another one just in case.
It has 7 splines on it.
The end that fits to the socket will fit either with a 20 or 22-mm socket depending on if you want it to be torqued with the smaller first fitting or the larger second fitting.
I am unsure as to where you take the measurement on the spline side.
If I measure from outside to outside, it is around 11/16ths.
Can someone point me in the right direction?
Attachments
-
17.6 KB Views: 13
-
16.3 KB Views: 13