Lil Devils

[Hunter]

Follow the instructions exactly and you'll be fine. For the plastic factory rivets, don't try to yank them out, you'll stretch the factory holes and the crush sleeves won't fit as tight(ask me how I know), take the time to drill them out like Bill recommends.

Agree. Did same thing..

 

[Blkout]

Personally, I got new front bolts ordered, did not re-use stock.
Also did not use hardware sent with fronts, used plastic rivets for a tight fit.

Interesting.

 

[Hunter]

Interesting.

The front uses 2 bolts (different sizes) 1 fwd wheel well, 1 aft (that I recall). May be 2 fwd, 1 aft.
Ordered from the dealer new ones.
Used plastic rivets on remainder

 

[PitchBlackCat]

My plan for the fronts when I purchase is to fasten with the same style plastic rivets that are currently there for the fender well liners. The rivnuts are permanent. There is no removing those. I avoid stuff like that when possible. I’m a “factory” nut. Passed this by bill and he didn’t see any issues going this route.

 

[Paladin06]

The front uses 2 bolts (different sizes) 1 fwd wheel well, 1 aft (that I recall). May be 2 fwd, 1 aft.
Ordered from the dealer new ones.
Used plastic rivets on remainder

No bolts forward on my 2019 and 2 lower aft.

 

[Davoo376]

Got my shipping notice as well. Looking forward to getting them installed.
Now I gotta get serious about looking at wheels because I have a feeling they are gonna make my stock setup look like pizza cutters.

 

[Hunter]

No bolts forward on my 2019 and 2 lower aft.

There is 1 fwd on 19's You have to dig for it.

 

[Paladin06]

My plan for the fronts when I purchase is to fasten with the same style plastic rivets that are currently there for the fender well liners. The rivnuts are permanent. There is no removing those. I avoid stuff like that when possible. I’m a “factory” nut. Passed this by bill and he didn’t see any issues going this route.

Did the require a special tool. Plz advise.

 

[Hunter]

No bolts forward on my 2019 and 2 lower aft.

Will try to get a pic

 

[Hunter]

Did the require a special tool. Plz advise.

Plastic rivet tool

 

[Hunter]

Front bolt.

 

[Paladin06]

Plastic rivet tool

Ordered on Prime. Coming tomorrow.

 

[Hunter]

Rear bolts

 

[Paladin06]

Front bolt. View attachment 15113

Yea, I see it.

 

[Hunter]

Tool

 

[Paladin06]

Rear bolts
View attachment 15114

Roger that.

 

[Hunter]

And an installed rivet.

 

[Hunter]

And an installed rivet.
View attachment 15116

Dang it. Just noticed paint chip.
Caused by bending tab back after NOT drilling original out at first.

 

[Paladin06]

Bill confirmed fronts are not magnets. Thanks all.

 

[Blkout]

Dang it. Just noticed paint chip.
Caused by bending tab back after NOT drilling original out at first.

Easy touch up. No one would notice.