Stinkeye Challenger build....

[Marc W]

This whole thing has got me so shook up that this happened! 🤯

 

[Hpindy]

That’s why it’s back in Chicago for hands on tuning. Don’t try that at home. These guys are serious about putting me down! And then there’s that damn Primetime. Little Maggie is going to kick my ass when he gets the six idler pulleys it needs to get the job done.

I thought more idler pulley ment more power?

Sent from my BBF100-2 using Tapatalk

 

[Hpindy]

This whole thing has got me so shook up that this happened! View attachment 17869

That's not the proper way to do weight reduction.......

Sent from my BBF100-2 using Tapatalk

 

[Marc W]

I thought more idler pulley ment more power?

Sent from my BBF100-2 using Tapatalk

Primetime needs as many as he can get!

 

[Marc W]

That's not the proper way to do weight reduction.......

Sent from my BBF100-2 using Tapatalk

It’s getting this NRG race wheel on a quick release hub so it can be removed to get in and out. I can do without all of the button functions on the stock wheel. I’ll just pretend that I’m back in the hotrod days when we didn’t have all that crap. I will be placing a real line lock button for a Hurst roll control. I’ve had enough of the malfunctioning Burn Box.

 

[Hpindy]

Primetime needs as many as he can get!

He's going to to relocate his power steering pump, A/C pump, alternator, all the ABS stuff just to make room for all his idler pulleys

Sent from my BBF100-2 using Tapatalk

 

[Hpindy]

It’s getting this NRG race wheel on a quick release hub so it can be removed to get in and out. I can do without all of the button functions on the stock wheel. I’ll just pretend that I’m back in the hotrod days when we didn’t have all that crap. I will be placing a real line lock button for a Hurst roll control. I’ve had enough of the malfunctioning Burn Box. View attachment 17877

That's it .... It's a full tilt race car now ! You removed the horn

Sent from my BBF100-2 using Tapatalk

 

[Marc W]

He's going to to relocate his power steering pump, A/C pump, alternator, all the ABS stuff just to make room for all his idler pulleys

Sent from my BBF100-2 using Tapatalk

His idler pulleys actually have idler pulleys

 

[Marc W]

That's it .... It's a full tilt race car now ! You removed the horn

Sent from my BBF100-2 using Tapatalk

I'm going to add a Roadrunner Meep Meep horn with it's own button. I want to Meep Meep those GT 500'S when I drive by....

 

[Hpindy]

I'm going to add a Roadrunner Meep Meep horn with it's own button. I want to Meep Meep those GT 500'S when I drive by....

I thought about installing the road runner horn too! Plus with a road runner part it will make you faster then any coyote........

Sent from my BBF100-2 using Tapatalk

 

[Hpindy]

His idler pulleys actually have idler pulleys

Primetime is the first person to "tub" the front of his car ........ He needs some where to fit all those idler pulleys

Sent from my BBF100-2 using Tapatalk

 

[Marc W]

Primetime is the first person to "tub" the front of his car ........ He needs some where to fit all those idler pulleys

Sent from my BBF100-2 using Tapatalk

Haha. We laugh now. He’ll probably blow everybody out of the water when that thing finally runs full boost up to 7000 rpm. That new Whipple better hurry up because I’ll be the red headed step child around there.

 

[Hpindy]

Haha. We laugh now. He’ll probably blow everybody out of the water when that finally runs full boost up to 7000 rpm. That new Whipple better hurry up because I’ll be the red headed step child around there.

Lol . Its all in good fun . I'm rooting for him . That Maggie was my second choice back when I bought my Demon supercharger ( I'm kinda glad it wasnt ready at the time though lol)

Sent from my BBF100-2 using Tapatalk

 

[Hpindy]

I was just talking to someone at magnuson and they sent me a picture of the idler pulleys just for the passenger side of primetime's engine . They are working on the drivers side now .

This picture is what is required just for the passenger side .

Sent from my BBF100-2 using Tapatalk

 

[jroyk]

Wasn't it like 18-24 months from the time Magnuson teased at SEMA until they put it on the market? Seems like plenty of time to get it right.

 

[Primetime Hellcat 17]

I was just talking to someone at magnuson and they sent me a picture if the idler pulleys just for the passenger side of primetime's engine . They are working on the drivers side now .

This picture is what is required just for the passenger side .

Sent from my BBF100-2 using Tapatalk

Lmao you guys.... you are killing me. I’m literally over here laughing as I type. Now let’s get it straight! It’s gonna be only 1 extra pulley not 2 or 3 only 1! Now if this doesn’t work Hpindy can you send me that link? I’m thinking I might need pulley’s all the way up to the steering wheel to make this work.🤔😬
That pic has to come from a website..... Where is the dam link! 😂😂😂😂😂😂
Cheers.... I’m ok I promise 🥴🤯😳

 

[Chuck]

And just like that..... 👊 View attachment 17051 View attachment 17052


Mark did you have to grind on caliper bracket on bottom mounting bolt I had to take just the corner of the bracket ?

 

[Marc W]

No I did not have to grind anything with the new billet spindles. That's basically the whole point of going with those The stock spindles were ground all to hell. Here's a picture of the clearance with the new spindle. Of coarse that being said.... all wheels are not going to be the same and another wheel may have less clearance. I have Billet Specialties and the caliper has significant clearance inside.
You can also see in this picture how much was ground off the end of that sway bar link. Those are the adjustable links also from Carlyle, and when used on the stock spindles need to be ground down to where theres almost nothing left to hold that heim joint together. That will be replaced when I can track down one the right size.

 

[Marc W]

Making headway with the quick release for the steering wheel......

 

[Marc W]

Came out nice. Perfect!