Rear wheel camber problems

[Fullinsurance-semitrailer]

Hello everyone, I found an issue with the camber of my right rear wheel during the wheel alignment, but I can't seem to locate the adjustment position for the rear wheel camber. Could you please tell me how to adjust the rear wheel camber? Thank you.

 

[Hunter]

@DGatzby

 

[DGatzby]

Camber is not adjustable. Try to adjust toe and then see what it shows.

 

[Fullinsurance-semitrailer]

@DGatzby

谢谢你（Thank you） Hunter

 

[Fullinsurance-semitrailer]

Camber is not adjustable. Try to adjust toe and then see what it shows.

Thank you for your help. We tried to adjust the toe-in, but the wheel camber didn't change. It's a new car and hasn't experienced any severe impacts. Could there be any other issues affecting the wheel camber, such as the shock absorbers or something else?

 

[MiHiHemi]

I put a Bwoody kit on mine to dial it in after lowering some years ago. You can also look into camber bushings to save a little coin.

 

[Linda's Hell Cat]

Thank you for your help. We tried to adjust the toe-in, but the wheel camber didn't change. It's a new car and hasn't experienced any severe impacts. Could there be any other issues affecting the wheel camber, such as the shock absorbers or something else?

Are you going to leave your car stock?

I saw there is some dragracing in China, would you be thinking about going?

Are you working with a shop with experience for adjusting the alignment of cars?

 

[1971demon]

Are you going to leave your car stock?

I saw there is some dragracing in China, would you be thinking about going?

Are you working with a shop with experience for adjusting the alignment of cars?

Drag racin in China

 

[DGatzby]

Thank you for your help. We tried to adjust the toe-in, but the wheel camber didn't change. It's a new car and hasn't experienced any severe impacts. Could there be any other issues affecting the wheel camber, such as the shock absorbers or something else?

-1.3 degree is within spec in the rear. -1.3 to -0.2 degree all ok on the rear camber FYI.

 

[Linda's Hell Cat]

Drag racin in China

That's Right and you know I am going to provide a link.

https://regional.chinadaily.com.cn/zhuhai/2017-09/26/c_105669.htm

Although @DGatzby would have extreme fun on this track https://www.racingcircuits.info/asia/china/zhuhai.html

 

[Fullinsurance-semitrailer]

Are you going to leave your car stock?

I saw there is some dragracing in China, would you be thinking about going?

Are you working with a shop with experience for adjusting the alignment of cars?

Hello Linda：

1、I want to keep this 'Last Call' as a collector's item, so I plan to leave it in stock condition.

2、Drag racing in China is still in its early stages and quite niche. It needs more time to develop, so I won't be participating for now. However, there are open track days at the Zhejiang Circuit near me, and I think I might give that a try when I have the chance.

3、In China, the Dodge Challenger Hellcat is extremely rare, which means there are very few specialized repair shops or experienced technicians. I think my best option is to try and find a shop with good wheel alignment equipment to restore the car's original settings.

 

[Fullinsurance-semitrailer]

Drag racin in China

There is drag racing in China, but it's still very niche.

 

[Fullinsurance-semitrailer]

-1.3 degree is within spec in the rear. -1.3 to -0.2 degree all ok on the rear camber FYI.

Thank you so much, I’ll try my best to forget about that -0.01 degree.

 

[Fullinsurance-semitrailer]

I put a Bwoody kit on mine to dial it in after lowering some years ago. You can also look into camber bushings to save a little coin.

Thank you for sharing your experience and advice!