What Mileage should I install an oil separator and breather?

[Unholy707]

My catch can might have a couple of drops in it at each oil change which happens very frequently.

What oil do you use?

 

[DavidKFla]

What oil do you use?

The Pennzoil Platinum.

 

[22MoparMuscle]

My catch can might have a couple of drops in it at each oil change which happens very frequently.

That’s good to hear. Quite of few members posted they don’t have much oil at all in their CC if they’re also using a breather.

 

[Unholy707]

That’s good to hear. Quite of few members posted they don’t have much oil at all in their CC if they’re also using a breather.

I haven’t checked mine since installing few hundred miles ago probably should

 

[ACMAVRO]

Came with the wrong o-ring😱 Upr sent two correct ones.

 

[vortecd]

Here’s a good pic. But it’s cool. Buy and go with what you like the best.

https://metcomotorsports.com/mbr0019

I have the Metco

 

[Unholy707]

Man mine don’t say upr on it

 

[EricG]

Came with the wrong o-ring😱 Upr sent two correct ones.

Nice!

 

[Ronin]

Getting ready for my first oil change and checked my catch can and at just under 1500 miles this is what was in there:

It was about a tablespoon's worth and looked milky/cloudy. Oil level on the dipstick was right at the top dot above the crosshatched portion. This will be my break-in oil change, and I was almost nerd-like in adhering to the recommended break-in procedure...

 

[drag racer]

very normal and typical to what I see in mine.

 

[22MoparMuscle]

I did my first oil change at 500 miles. The oil wasn’t too dirty but the oil that came out of the factory installed oil filter was black. So the filter was doing its job. I’m glad I changed it early. And the filter was on super tight like everyone says lol